[pianotech] Pully keys

John Delacour JD at Pianomaker.co.uk
Tue Apr 20 10:44:38 MDT 2010


At 09:11 -0700 20/4/10, Ryan Sowers wrote:

>Yes, Schaff sells the kit. The problem is the fiber washers are 
>junk: loose AND too hard. The boring device works well, so if you 
>can make your own wooden inserts it might be a good way to go.

In fact I did consider doing that and discovered that I have some 
hornbeam plate bushings with a pilot hole that are just the same o/d 
as the socket made by the tool.  These would work fine.

JD
-- 
______________________________________________________________________
   Delacour Pianos  *  Silo  *  Deverel Farm  *  Milborne St. Andrew
                      Dorset DT11 0HX  *  England
                        Phone:  +44 1202 731 031
                        Mobile: +44 7801 310 689
______________________________________________________________________


More information about the pianotech mailing list

This PTG archive page provided courtesy of Moy Piano Service, LLC