Brain, Greg, After reading your helpful posts, I'll opt out of the portable dream. Thank you! Barbara Richmond, RPT near Peoria, Illinois ----- Original Message ----- From: "Brian Trout" <brian_trout at hotmail.com> To: pianotech at ptg.org Sent: Thursday, July 1, 2010 11:35:30 AM Subject: Re: [pianotech] Air compressor Probably a fine compressor. But do bear in mind that compressors of this type will make a LOT of noise. And it will also need a good power (electrical) source. This one is listed at 14 amps, and I don't know that it wouldn't trip some 15 amp breakers on startup, especially if something else were running on that same circuit. Would you be running this thing in a customer's home? (or church or school?) Or do you have a utility trailer set up like a portable shop? (That would be a neat idea.) Whatever you're cutting or buffing or sanding or (?) could also be messy. Just the thoughts that came to mind. Good luck, Brian -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100701/ac94ad9e/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC