But it does become important when you go to fill up your racing bicycle tires...... ;-) Terry Farrell On Jul 1, 2010, at 3:51 PM, Mike Kurta wrote: > All your comments are correct. Speaking as an auto mechanic in > another life, CFM (cubic feet per minute) is the name of the game, > not PSI or pressure. Keep in mind almost any air tool you will use > is the same as opening up the end of the air hose wide. If the > compressor doesn't produce the volume needed to keep up with what > you're using, the tool will slow or stop until the pump makes up the > difference. This is especially true with impact wrenches and spray > equipment. > Mike Kurta > ex/wrench -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100701/a981b569/attachment-0001.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC