Susan: Are you using an impact lever, or jerking a traditional lever? Terry Farrell On Jul 3, 2010, at 5:57 PM, Susan Kline wrote: > At 02:31 PM 7/3/2010, you wrote: >> Assuming those four rusty strings aren't going to break anyway. > > Common sense shouts that fewer will break if not subjected to a > strong overpull. > > It also seemed counterintuitive that a quick jerk from using an > impact tuning lever would break fewer strings than a slow pull, > though the incantation "it breaks static friction" plus the > realization that it's a lot less physical work convinced me to use > an impact technique for pitch raises a lot of the time. > > Scientifically impossible to prove one way or the other, IMO. > > Susan >
This PTG archive page provided courtesy of Moy Piano Service, LLC