[pianotech] Interested in work as an RPT

Dennis Quinn dquinn at ci.duncanville.tx.us
Wed Jul 7 16:10:27 MDT 2010


Thanks, Paul. I'm in Arlington, TX, and I've gotten the contact info of Dave Conte and Kraig Gilliam. Sent them basically the same questions I put on the list, but haven't heard back from either of them yet. Thanks for the input, though, and if you can think of anyone else in the Dallas/Fort Worth area, please don't hesitate to recommend them to me. I'm not looking to jump into it too soon - just scoping out the field for now - but I expect any networking I can do couldn't hurt!

Thanks, again!
-Dennis

-----Original Message-----
From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Paul T Williams
Sent: Wednesday, July 07, 2010 4:21 PM
To: pianotech at ptg.org
Subject: Re: [pianotech] Interested in work as an RPT

Dennis,

What a great time you chimed in!

Correspondence courses are fine, but, if you do so, say, under the direction of such, it is absolutely necessary that you connect with a local RPT to get the hands on training and immediate feedback on your work.  If you could find a local RPT that could train you-hands on- personally, for 2 years, you could benefit from not spending thousands of dollars for training ala outsourced areas, plus the costs of paying a local technician for his/her time as well.

I'm not putting down correspondence type classes at all, as these work great for certain situations, but, when you learn this craft, there is no comparing that with a skilled technician looking over your shoulder as it were.

I was fortunate to learn hands on from a very nationally reputable technician and I would never, looking back, have wanted to learn otherwise. I've now been in the business 20 years, and still learn something every month from the old school guys at our chapter meetings! :>)

Where are you? I might be able to hook you up with some RPT in your area that could help.

Best of luck,

Paul T. Williams RPT
Piano Technician
School of Music
5 Westbrook Bldg,
University of Nebraska
Lincoln, NE 68588-0100
pwilliams4 at unl.edu



From:

Dennis Quinn <dquinn at ci.duncanville.tx.us>

To:

Pianotech List <pianotech at ptg.org>

Date:

07/07/2010 03:44 PM

Subject:

[pianotech] Interested in work as an RPT


________________________________



Hello Everyone,

I'd like to get some advice on the best way to get into the field of piano tuning/maintenance/repair (including PTG membership), and Mr. Foote's recent post seemed to indicate a good time to ask in this forum.

I've played the piano for most of my life and earned a BM in Music History a few years ago. I went on to complete an MS in Library Science, and now I work full-time as a cataloger for a public library, but I'm considering the idea of a part-time side job as a freelance piano technician. I have great deal of respect for the work of RPTs, and I'd really like to be able to help pianists and piano enthusiasts keep theirs in proper working order. Unfortunately, I wouldn't be able to pursue a full-time training institute such as those listed on the PTG website. Would a correspondence course suffice? Are any of them more highly recommended than others? What about apprenticeship?

Also,

Please feel free to reply off-list if you wish.

Thanks,
Dennis Quinn
Dallas/Forth Worth, TX
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100707/99efda67/attachment-0001.htm>


More information about the pianotech mailing list

This PTG archive page provided courtesy of Moy Piano Service, LLC