Its kind of long story I'll tell more tomorrow. Long day. Piano convention is over for this eve. Good discussions all Dale S. Erwin www.Erwinspiano.com 209-577-8397 -----Original Message----- From: jimialeggio <jimialeggio at gmail.com> To: pianotech at ptg.org Sent: Thu, Jul 15, 2010 6:24 pm Subject: Re: [pianotech] soundboard grain angle vs "faux"stiffness Having flirted with tap dancing on glass I am able to use the Ronsen Products on our rib crowned boards. But we rib at approx 6% for rib crowned stuff. The difference in types of stiffness is an interesting idea. So,isn't stiff just ...stiff? Dale S. Erwin Dale, it would be helpful to know where your private B was tonally before voicing. After you had the "every piano" tone regulation out of the way, what tonal issues did you have to massage in the voicing? Jim I Jim Ialeggio grandpianosolutions.com 978- 425-9026 Shirley, MA -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100715/709594e1/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC