Damper stop rail properly adjusted? On Jul 20, 2010, at 7:48 PM, Ed Carwithen wrote: > I need help getting the adjustment right on the sostenuto mechanism > of a 1918 Sohmer 9 foot grand. > > This is a piano that I have been servicing for several years but one > section of dampers has always been a problem. I knew that I would > have to repin the under lever flanges some time and this past week > was the time. > > In order to get to the under lever flange screws I had to unhook the > sostenuto rod. I got the flanges repinned and back and they work > fine, but now I can't get the sostenuto regulated. I have fiddled > with it (and fiddled with it; and fiddled with it) but just can not > get the tolerance correct. > > Any suggestions from the collected wisdom of this website would be > greatly appreciated. > > HELP!!!! > > Ed Carwithen > John Day, OR > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100720/bda4ce6f/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC