I have a church client with a bunch of Baldwin Hamiltons. I'm replacing hammers on at least one with virtually all hammer felts ungled from the moldings. If the heads have not actually come loose (as on another piano) can I some how prevent the hammers from separating? (The church has significant humidity problems, and I'm putting damppchasers in all their uprights which are in areas where humidity is a real problem.) Thanks Les bartlett -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100726/ccf8940b/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC