[pianotech] Bouncing Bostons

Matthew Todd toddpianoworks at att.net
Thu Jul 29 22:22:05 MDT 2010


How the staccato is played will give a different result as well.  i.e., whether you play the staccato by striking the note from above, or by beginning with your hand on the key and having a quick, brisk snap of the wrist.  It's even possible to play the staccato two different ways and not even realizing it, creating two different results with the mechanism.


TODD PIANO WORKS 
Matthew Todd, Piano Technician 
(979) 248-9578
http://www.toddpianoworks.com

--- On Fri, 7/30/10, David Love <davidlovepianos at comcast.net> wrote:


From: David Love <davidlovepianos at comcast.net>
Subject: Re: [pianotech] Bouncing Bostons
To: pianotech at ptg.org
Date: Friday, July 30, 2010, 4:00 AM








Do you mean that it’s rebounding off the cushion into the string on a quick firm staccato blow?  If so then check the flange pinning, it’s probably too loose.  I don’t see the balancier pinning as an issue as in one suggestion.  In fact, one can increase the friction in the balancier (and in a performance piano one probably should) in order to be able to increase the tension on the repetition spring (and thereby the jack return as well) improving repetition immensely, especially with a hammer flange with adequate friction (0-1 grams is not adequate friction btw).  
 
David Love
www.davidlovepianos.com
 
 



Hi List,

 

Anyone know of anything chronic in Boston Grands (GP178) that has the hammer double striking on a quick/firm staccato blow?  I've got one that does.  Anyone have any ideas/solutions?  The piano is finely regulated otherwise (just today, in fact).  1 3/4" blow, about .400" Key Travel, Checking about 1/2", Rep springs are definitely NOT jumpy.  In all other ways, the action plays nicely, controllably.  And that is no mean feat.  I took some DW/UW measures today out of curiousity, and they were haywire.  DW range from 62g - 46g, UW from 18g to 35g or so.

 

My thoughts are turning to action pinning (haven't checked yet).  Key Bushings and pins are clean and lubed (teflon), but that's as far as we got.  Wondering if tight pinning (of any parts) might contribute to this rebounding back into the strings - and it is a full rebound.  You can watch the hammer appear to bounce off the rest rail, though I'm not convinced that is exactly what is happening.  Kind of musing aloud here.............. 


William R. Monroe
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100729/344a4b50/attachment.htm>


More information about the pianotech mailing list

This PTG archive page provided courtesy of Moy Piano Service, LLC