Ed why do you need to always be state the obvious. For once can't you just try being contrary :) Dale S. Erwin www.Erwinspiano.com Custom piano restoration Ronsen piano hammers-sales R & D and tech support Sitka soundboard panels 209-577-8397 209-985-0990 -----Original Message----- From: Ed Foote <a440a at aol.com> To: pianotech at ptg.org Sent: Tue, Nov 2, 2010 4:12 pm Subject: Re: [pianotech] Ahhh, Piano talk at last! :>) Why not use the Monroe Bridge Pin Puller (or some variant) ;-] I'm with Terry, 3-4 mm seems like enough to get a pair of vice grips on, and for stubborn ones, make a puller like this one with a weighted slide. Works well on stubborn pins. If they are that tight, why pull them? Ed Foote RPT http://www.uk-piano.org/edfoote/index.html -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20101102/83a7bd86/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC