[pianotech] Spinet Lifter Wires

[Noah Frere]

Joe i also need 1! But i'll take several if you've got enough for Marshall
and i both. My wire measures 8" long. The threads are about 3/8" at the
bottom and 1 1/4" at the top. The top has a wooden dowel 1/2" long and 5/16"
diameter glued into green felt atop a white felt punching. Old broken
plastic elbows which i am replacing with the Vagias elbows.

On Thu, Nov 4, 2010 at 10:18 AM, Joseph Garrett <joegarrett at earthlink.net>wrote:

>  Marshall said: "HI Everyone,
> I wanted to know if anyone out there woudl have a drop lifter wire with
> button from a winter spinet I coud purchase from them. I'm not sure how I
> came up one short on this thing but I'm amazed. I was so careful but I guess
> not careful enough. I counted and even bungied the wires so they woudln'tget
> loose. Well be as it may I'm one short, so if anyone out there has one, I'd
> be happy to purchase it. I can put the elbow on etc. Thanks "
>
> Marshal,
> Will need more information! How long is the wire? Does it have an elbow on
> it or does it connect in a different way? Winter Spinets are not all the
> same, ....unfortunately. I do have a lot of that sort of thing in the
> cobwebs, but you need to be more specific.
> Joe
>
>
> Joe Garrett, R.P.T.
> Captain of the Tool Police
> Squares R I
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20101104/8d269d75/attachment.htm>