Yes, We still get a chance to do some work together. He is happy as a tick - new woman in his life. Gene ----- Original Message ----- From: Dale Erwin To: pianotech at ptg.org Sent: Friday, November 19, 2010 7:09 PM Subject: Re: [pianotech] Plate finish problems I'll check it out Gene. Seen Peter lately? thanks Dale S. Erwin www.Erwinspiano.com -----Original Message----- From: Gene Nelson <nelsong at intune88.com> To: pianotech at ptg.org I refinished 3 plates using Kondar primer made by PPG. It has more solids that most others. It is an automotive type and requires a specific lacquer thinner and sands very easily. You might need a sealer coat first if it reacts with what is on there. Not available is some California counties because of voc's. Peter Clark introduced it to me. Gene --- -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20101120/c17fb852/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC