Hi Paul, I would respectfully disagree. When at the factory three years ago (and this spring) we looked at the CNC machine that does the cutting to radius the key bed. It was still done then, and I've heard nothing to the contrary in the past three years. FYI. William R. Monroe On Tue, Oct 12, 2010 at 9:27 PM, <PAULREVENKOJONES at aol.com> wrote: > You'll have to live with maybe. I do. Six impossible things before > breakfast and all of that...And it's totally irrelevant which side I fall > on. No need to be pushy.:-) > > Hamburg used this bed/frame curving up to a point, and no longer do. New > York gave up doing this years ago. > > See the attached communication from Horace Greeley from 1997. > > Paul > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20101013/e1017370/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC