I am looking for two specs, either a specific value or range of distance for an Estonia 190's: 1) key height 2) wippen flange to hammershank flange distance For the other specs, if other than the standard 1 3/4 - 1 7/8" blow, 1/32" let-off, 1/16" drop, 10-11mm dip, 5/8" backcheck; what the factory says or what you have found out will be helpful. Thanks, Bob T -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100906/52d109ae/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC