[pianotech] SHort lyre sticks

[Joe Goss]

Add a V of two 1/4" X 1"  X 3" sticks at the back of the rods if they are 
just falling out going towards the back.
Use 1" sheet rock screws to attach.
Joe Goss BSMusEd MMusEd RPT
imatunr at srvinet.com
www.mothergoosetools.com
----- Original Message ----- 
From: "Joe Wiencek" <joespiano at gmail.com>
To: <pianotech at ptg.org>
Sent: Sunday, December 11, 2011 12:41 PM
Subject: [pianotech] SHort lyre sticks


> What methods have you used for Steinway lyre sticks that are too loose  to 
> support the lyre, either from the keybed slots getting chewed up  and 
> eroded, or from lyre sticks that are just too short?
>
> Thanks for all help,
>
> Joe Wiencek
>
>
>
>
>
>
>
>
>
>