[pianotech] adjusting grand shift spring

[Ryan Sowers]

On Thu, Dec 29, 2011 at 8:24 AM, Joseph Garrett <joegarrett at earthlink.net>wrote:

> Ryan & Al  said: "Ryan, you described the best design. It's just that
> simple. Don't leave to much overhang, so you can get close to where it's
> screwed to the case."
>
> Al & Ryan,
> The easiest way is take the spring out. Walk outside and place spring on
> sidewalk. Stomp on that puppie! Pick it up and return to piano. Install
> spring. Done.<G> (Of course, if the spring is not strong enough...that's
> whole 'nuther story. I do have some new ones in my shop tho.<G>)
> Joe
>
>
> Joe Garrett, R.P.T.
> Captain of the Tool Police
> Squares R I
>
>


-- 
Ryan Sowers, RPT
Puget Sound Chapter
Olympia, WA
www.pianova.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20111229/0d4b606a/attachment.htm>