[pianotech] Type of glue for a Kawai

[Don Mannino]

Phil,

As you found, wood glue does not adhere well to plastics.  Common choices are PVC-E, PVC-A, C/A glue (needs to be very thick C/A to prevent soaking into the felt too much), or epoxy.

The PVC glues are good to carry because they also work well for minor wood repairs in many cases.

Don Mannino

-----Original Message-----
From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Phil Ryan
Sent: Friday, March 04, 2011 3:19 PM
To: pianotech at ptg.org
Subject: [pianotech] Type of glue for a Kawai


I replaced a butt-felt on a Kawai upright piano that had fallen off somewhere and the jack was making noise.  The piano was the new carbon fiber (black plastic) type of action.  I used some white glue I had in 
my case and when it got tacky I reassemble it.   Worked fine!  Played it 
a hundred times.  Day later I get a call-back, the jack is clanking again.  Did I use the wrong type of glue for this material?  CA perhaps?

Phil Ryan
Miami Beach