Thank you everyone. Feeling a lot more comfortable now. I going with the PVC-E and CA - Susan Kline's technique. Gotta luv this site...:) Thx again, Les K Date: Sat, 5 Mar 2011 21:14:19 -0800 From: "Joseph Garrett" <joegarrett at earthlink.net> To: "pianotech" <pianotech at ptg.org> Subject: Re: [pianotech] Attaching Ivory Message-ID: <380-2201130651419906 at earthlink.net> Content-Type: text/plain; charset="us-ascii" Need some advice on what adhesive to use for re-attaching a couple of ivory heads. I have so PVC-E but not sure if I should contact a local tech and try to obtain a few wafers instead. Appoint is scheduled for Monday morning and wondering if I should re-schedule. Thanks PVC-E is good. However, I would suggest adding a small amount of Titanium Dioxide to Whiten it sufficiently, so that it doesn't have show-through. Joe Joe Garrett, R.P.T. Captain of the Tool Police Squares R I Les K -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20110306/dba0f761/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC