Hi David, I have a special paddle I use, it is a piece of dragon skin I glued onto a paddle. It takes the felt off very quickly. I then go on to finer grits with various paddles and sandpaper strips finishing off with 600 grit. Regards, Jack Houweling _____ From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of David Boyce Sent: Saturday, March 12, 2011 5:25 PM To: pianotech at ptg.org Subject: [pianotech] Cosmetic aspects of filed hammers Yesterday I tried hammer filing using a small Dremel-type tool for the first time. Hitherto, I've always used home-made sanding paddles. I've been meaning to ask for a while, what others do, if anything, to improve the appearance cosmetically when the top surface of the hammers is very grubby. I found yesterday that the dremel tool was quite good for that. I am attaching two pairs of before-and-after pics. One from hand filing, and yesterday's with the little drill. The angle of the photos makes it look as if all trace of grooves was removed, but actually that's not the case. Plus, the photos seem to exaggerate small unevenesses! I have read in the past, of using dressmakers' chalk to brighten grubby hammer topsides, but that seems a laborious process and somehow slightly distasteful. Best regards, David Boyce -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20110312/9cfd9bee/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC