Arlie, Cut a piece of leather into the shape of a square cross (with some variations) and it will fold down into the hole for a perfect rod bushing. Add some lube and voila! Dan Berg ----- Original Message ----- From: "Arlie Rauch" <adarpub at midrivers.com> To: <pianotech at ptg.org> Sent: Tuesday, March 29, 2011 7:31 PM Subject: [pianotech] Rubber watchamacalits I tuned a Baldwin SF grand today that I haven't seen for a while. The sustain pedal squeaked, and as far as I could tell the offender was the hard, dried out, rubber cup, bushing, collar (I don't know what to call it) that sits in the end of the pedal and receives the pedal rod. Does anyone know where to get these? They are not the same from piano to piano. I have some for other brands, and they did not work here. The whole set needs to be replaced. I can't find them in Schaff's catalog (doesn't mean they aren't there). Arlie Rauch Glendive, MT=
This PTG archive page provided courtesy of Moy Piano Service, LLC