[pianotech] shift shim

[Joe Goss]

Depends on where the action will end up in relation to being able to remove and get the action to go back in without being blocked by the shift lever.
Joe Goss BSMusEd MMusEd RPT
imatunr at srvinet.com
www.mothergoosetools.com
  ----- Original Message ----- 
  From: tnrwim at aol.com 
  To: pianotech at ptg.org 
  Sent: Sunday, November 13, 2011 1:46 PM
  Subject: [pianotech] shift shim


  The shift on my S&S has about a 1/2" - 5/8" gap. Should I shim the action frame or add leather to the shift lever at the pedal rod?

  WIm


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20111113/0abb1fff/attachment.htm>