[pianotech] Damper wire bushing lubrication?

[paul bruesch]

I haven't tried it, but wouldn't a pipe cleaner work, too?

Does the hobby shop brush last for the entire set? Multiple entire sets?

Paul Bruesch
Stillwater, MN

On Sat, Sep 3, 2011 at 9:50 AM, William Monroe <bill at a440piano.net> wrote:

> ;-]
>
> Just kidding, Barb.
>
> I have a little brush that I found in a hobby shop - it's supposed to be a
> single use type of affair.  The design is really perfect for this.  It's
> about a 4" brush, very small, and the tip is a small round ball.  Dip in
> Teflon, run through the bushing.  It's the perfect size for guide rails; the
> ball tip passes easily through the bushing but with a good amount of
> friction so the tip touches everywhere on the bushing.  Spin it in, spin it
> out.  If I get a moment, I'll take a picture later and post it.
>
> William R. Monroe
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20110903/98eb2f7e/attachment.htm>