I said: "I use Elmer's Slide All after cleaning the pins with my super speedy key pin cleaner.<G> GAAA (a new thangee)." Laura said: "Do tell. This is a tool that I am interested in." Well, then, ya need to convince the powers that be to allow me to give the class. In that class I'd demonstrate the way I MADE it and how it is used, (quite efficient, I might add. Clean and polish the entire set in less than 1/2 hour!) And then there is the special tool that I designed for straightening the confounded oval front rail pins, so that they are exactly straight, front to back.<G> That tool does it's trick in less than 15 minutes and does not damage the key pin! Go figger.<G> Oh, and while your at it, try and convince the powers that be, that they need to compensate Instructors a helluva lot better than they currently are! Just my take on it.<G> Joe P.S. I also have a "Magic Line" Tool that will be in production soon. (hopefully, I'll be able to get the Machinist off of his lazy duff.<G> Joe Garrett, R.P.T. Captain of the Tool Police Squares R I
This PTG archive page provided courtesy of Moy Piano Service, LLC