[pianotech] Fwd:

[Ron Nossaman]

On 9/30/2011 8:32 AM, William Monroe wrote:
> An impact driver may work.  I haven't used one in this location, but I
> think it shouldn't be a problem.
>
> Like this:
> http://www.harborfreight.com/impact-screwdriver-set-with-case-37530.html

That may work, but this certainly would.
http://www.harborfreight.com/1-2-half-inch-compact-air-impact-wrench-94802.html

In the years since I've been using impact tools to pull and install big 
screws (etc) this sort of thing has ceased to be a problem.

Willing to be spoiled,
Ron N