Yeah, likewise. Just figured Wim may not be plumbed with air. Well, his shop anyway...... ;-] WRM On Fri, Sep 30, 2011 at 8:47 AM, Ron Nossaman <rnossaman at cox.net> wrote: > On 9/30/2011 8:32 AM, William Monroe wrote: > >> An impact driver may work. I haven't used one in this location, but I >> think it shouldn't be a problem. >> >> Like this: >> http://www.harborfreight.com/**impact-screwdriver-set-with-** >> case-37530.html<http://www.harborfreight.com/impact-screwdriver-set-with-case-37530.html> >> > > That may work, but this certainly would. > http://www.harborfreight.com/**1-2-half-inch-compact-air-** > impact-wrench-94802.html<http://www.harborfreight.com/1-2-half-inch-compact-air-impact-wrench-94802.html> > > In the years since I've been using impact tools to pull and install big > screws (etc) this sort of thing has ceased to be a problem. > > Willing to be spoiled, > Ron N > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20110930/1e53dda6/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC