Arlie Send a sampling of hammers to yor hammer maker. I would suggest you also repalce the shanks and flanges, so send those, too. Wim -----Original Message----- From: Arlie Rauch <adarpub at midrivers.com> To: pianotech <pianotech at ptg.org> Sent: Fri, Sep 30, 2011 8:57 am Subject: [pianotech] Grand hammer weight I am looking at replacing the hammers on a 1932 Kimball grand. The piano was ormerly in a bar. The old hammers are sanded down, in some cases almost to the ood, so that regulation currently is all but impossible. My question is, how o I decide what weight of hammers to use? Arlie Rauch -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20110930/0cfb2cb7/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC