Sure, Dean, but its been so long how do I do that? An attachment? I got the Idea from Mr. Dave & Willis Synder many moons ago. Dale akaTone Warrior Dale Erwin RPT Erwins Piano Restoration inc. Custom rebuilt Steinways-sale/services Ronsen hammers sales. Pre-hung hammers & parts Sitka- Soundboard- Supplies WWW.Erwinspiano.com 209-577-8397 -----Original Message----- From: Dean May <deanmay at pianorebuilders.com> To: pianotech <pianotech at ptg.org> Sent: Sat, Feb 4, 2012 6:21 pm Subject: Re: [pianotech] Knuckles Hey Dale, It would be valuable to me, perhapsothers, if you could post some pics and explanation of how your plexiglasstarget works. Dean Dean WMay (812) 235-5272 voice and text PianoRebuilders.com (888) DEAN-MAY Terre Haute IN 47802 Give us a LIKE on Facebook! Go to PianoRebuilders.com From:pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Dale Erwin Sent: Saturday, February 04, 20126:50 PM To: pianotech at ptg.org Subject: Re: [pianotech] Knuckles Hey Rick I do this frequently & it takes a about 20 minutes to set up theplexiglass target I use to mark the center line of the unison. I use this toalign hammers to strings later. 20 minutes to get the screws out of the flangesand into the screw rack. 20 minutes to cut off the old one. About 30 minutes tocut a new slot on all 88 with the slotting jig on the table saw. About 1 to 11/2 hrs to install knuckles. 30 minutes to screw flanges/shanks back onto rails and 20 minutes to align hammers to the string marks on the jig. How much time is that. I'm slow but whos counting....oh yeah...Joe is.That rascal. :) Dale Dale Erwin RPT Erwins Piano Restoration inc. Custom rebuilt Steinways-sale/services Ronsen hammers sales. Pre-hung hammers & parts Sitka- Soundboard- Supplies WWW.Erwinspiano.com 209-577-8397 -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20120204/f6998e9c/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC