[pianotech] Mason & Hamlin Bb legs

[richarducci at comcast.net]

I also need legs for a s&c console which are broken at the caster end and cracked at the top. 
These are weight bearing legs.
I would prefer new similar legs if possible. Does anybody have any contacts?

Rick Ucci
Uccipiano.com

On Feb 10, 2012, at 8:31 PM, Dale Erwin <erwinspiano at aol.com> wrote:

> Hi Guys and Gals
>   I am looking for a used or new set of BB  Mason & Hamlin legs for a 1920s area piano. 
>  The ones that came with are really chewed up at the bottom and one is missing the square/tapered brass ferrule/skirt.
>  Write or respond privately.
>   Kind regards
>    Thanks
>   Dale
> 
> Dale Erwin RPT-
> Mason & Hamlin/Steinway/U.S pianos
> Pre-hung Ronsen hammer sets/Abel parts
> Sitka Soundboards & Supplies
> WWW.Erwinspiano.com
> 209-577-8397
> 
>  
>   
> 
> 
> 
> -----Original Message-----
> From: CHARLES BECKER <cbeckercpt at verizon.net>
> To: PTG <pianotech at ptg.org>
> Sent: Fri, Feb 3, 2012 4:36 am
> Subject: [pianotech] archives
> 
> Is there a simple way to access the archives?
>  
>  
> thanks
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20120211/a7d0385a/attachment.htm>