Hi, Rick! Send me the photo of Console Legs needed,I have a good collection of them and I will try to help you. For Dale:I have a good collection of Ferrules,square and round ones. isaac On Feb 11, 2012, at 5:21 AM, richarducci at comcast.net wrote: > I also need legs for a s&c console which are broken at the caster > end and cracked at the top. > These are weight bearing legs. > I would prefer new similar legs if possible. Does anybody have any > contacts? > > Rick Ucci > Uccipiano.com > > On Feb 10, 2012, at 8:31 PM, Dale Erwin <erwinspiano at aol.com> wrote: > >> Hi Guys and Gals >> I am looking for a used or new set of BB Mason & Hamlin legs for >> a 1920s area piano. >> The ones that came with are really chewed up at the bottom and one >> is missing the square/tapered brass ferrule/skirt. >> Write or respond privately. >> Kind regards >> Thanks >> Dale >> >> Dale Erwin RPT- >> Mason & Hamlin/Steinway/U.S pianos >> Pre-hung Ronsen hammer sets/Abel parts >> Sitka Soundboards & Supplies >> WWW.Erwinspiano.com >> 209-577-8397 >> >> >> >> >> >> >> -----Original Message----- >> From: CHARLES BECKER <cbeckercpt at verizon.net> >> To: PTG <pianotech at ptg.org> >> Sent: Fri, Feb 3, 2012 4:36 am >> Subject: [pianotech] archives >> >> Is there a simple way to access the archives? >> >> >> thanks -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20120211/f07478ef/attachment-0001.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC