Any ideas how to unscrew this? Is there a tool made just for this? Any home made tool designs someone might want to share? Two #10 WNG bridge pins fit into each recess but will not budge it when I turned them with a big crescent wrench. Possibly some square steel rod that fit a bit better would be helpful. Thanks, Gene -------------- next part -------------- A non-text attachment was scrubbed... Name: how to remove it.jpg Type: image/jpeg Size: 116412 bytes Desc: not available URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20120627/562ae7cc/attachment-0001.jpg>
This PTG archive page provided courtesy of Moy Piano Service, LLC