Thank you. That's what I was looking for. David Love www.davidlovepianos.com From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Nicholas Gravagne Sent: Thursday, May 10, 2012 6:56 AM To: pianotech at ptg.org Subject: Re: [pianotech] plate finishing RE Paint pens: Go to http://www.dickblick.com/products/elmers-painters-paint-markers/ <http://www.dickblick.com/products/elmers-painters-paint-markers/%20> Elmer's Paint Pens #21312-2002 Medium tip Black and #21312-2005 Fine tip, $3.88 each. See in middle portion of web page. I believe that I learned of these from someone on this list a few years ago. Anyway, they work great and if you make a mistake clean up is easy with a rag, no solvents or special cleaners. One thing, though; use pens prior to top clear coat, but "rough up" the raised plate letters with a rag or the paint will bead up as you apply it. Just rub the rag over the letters to break the glaze of your last lacquer coat, then all works fine. Final top coat does not cause the markings to smear or run. NG On Thu, May 10, 2012 at 4:11 AM, Encore Pianos <encorepianos at metrocast.net> wrote: They are not, Thump. Buy and try, then select what works best. Will Truitt From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Euphonious Thumpe Sent: Thursday, May 10, 2012 6:29 AM To: pianotech at ptg.org Subject: Re: [pianotech] plate finishing Don't remember the brand. Probably all about the same. Euphonious Thumpe From: David Love <davidlovepianos at comcast.net> To: pianotech at ptg.org Sent: Wednesday, May 9, 2012 9:57 PM Subject: Re: [pianotech] plate finishing I kind of figured the color. What type of pen. David Love www.davidlovepianos.com From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Euphonious Thumpe Sent: Wednesday, May 09, 2012 6:39 PM To: pianotech at ptg.org Subject: Re: [pianotech] plate finishing >From art supply stores. Gloss-black, available in several tip types. Euphonious Thumpe From: David Love <davidlovepianos at comcast.net> To: pianotech at ptg.org Sent: Wednesday, May 9, 2012 9:15 PM Subject: Re: [pianotech] plate finishing Which paint pens do you use David Love www.davidlovepianos.com From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Euphonious Thumpe Sent: Wednesday, May 09, 2012 6:07 PM To: pianotech at ptg.org Subject: Re: [pianotech] plate finishing I don't know about Will, but the paint pens I use have paint in them that would be disturbed by the solvents in a top coat. Euphonious Thumpe From: "chrisstor at aol.com" <chrisstor at aol.com> To: pianotech at ptg.org Sent: Wednesday, May 9, 2012 8:43 PM Subject: [pianotech] plate finishing Will, Just to be clear, do you do your plate lettering just before the final coat of clear? Chris S. -- Nick Gravagne, RPT AST Mechanical Engineering -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20120510/76474e62/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC