Thanks Susan. Wim, I have read about teflon contamination. Will it happen on these cords?. If no, then I would not replace. Thanks. Lim On May 23, 2012 11:16 AM, <tnrwim at aol.com> wrote: > That's what I thought. Again, why would you want to replace it? > Wim > > > > -----Original Message----- > From: lim hock seng <limhseng at gmail.com> > To: pianotech <pianotech at ptg.org> > Sent: Tue, May 22, 2012 4:57 pm > Subject: Re: [pianotech] SnS M > > Thanks Wim, > Here is the pic for the plastic cord. > On May 23, 2012 10:17 AM, <tnrwim at aol.com> wrote: > >> Lim >> >> Unless these parts are broken or eaten, there should be no reason to >> replace them. >> >> 1. balance punchings with wood base-when should I replace or refelt ? >> If the felt is gone, then it would be easier to buy new ones from Steinway. >> Then you will need to level the keys. >> 2. Plastic cord for repetion spring-replace? Where is there plastic in >> the repetition spring? >> 3. whippen jack top-replace? You can reburnish the top of the jack if >> that will help with repetition. >> >> Wim >> >> >> >> -----Original Message----- >> From: lim hock seng <limhseng at gmail.com> >> To: pianotech <pianotech at ptg.org> >> Sent: Tue, May 22, 2012 3:29 pm >> Subject: [pianotech] SnS M >> >> Dear list, >> I am servicing a M model and I need an answer on these parts. >> 1.balance punchings with wood base-when should I replace or refelt ? >> 2. Plastic cord for repetion spring-replace? >> 3.whippen jack top-replace? >> Thanks. >> Lim >> > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20120523/b2b92771/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC