On 5/30/2012 10:51 AM, Joseph Garrett wrote: > Ron N. said: "Actually, they need to be a specific *strength* and diameter. > Gauge > would depend on the material used." > > Ron, > Let me put it another way: They need to be made of a specific diameter of > brass spring wire. And, they need to be a specific diameter, (size), so > that they fit into the routing under the rocker capstan! The "strength" is > derived from these specifications, AND the specific length of the spring > and cord. Yea Joe, I understand that. Diameter is specific, I know that. Spring rate is specific, I know that too. Material isn't necessarily sacred as long the above performance criteria can be met, in case the exact replacement material isn't possible. I know that three. Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC