Joe Garrett, R.P.T. Captain of the Tool Police Squares R I > [Original Message] > From: Joseph Garrett <joegarrett at earthlink.net> > To: Patrick C. Poulson <pcpoulson at sbcglobal.net> > Date: 5/31/2012 8:21:44 PM > Subject: Re: [pianotech] Square Grand Hammer Shanks > > Patrick, > On those 8, you should have inserted some veneer and brought them back to specs that way. Tsk! Tsk! <G> Now you have 8 that don't feel like the rest. > Regards, > Joe > > > > [Original Message] > > From: Patrick C. Poulson <pcpoulson at sbcglobal.net> > > To: <joegarrett at earthlink.net>; <pianotech at ptg.org> > > Date: 5/31/2012 7:45:45 PM > > Subject: Re: [pianotech] Square Grand Hammer Shanks > > > > Jpe: I missed that one, about Pallet Rods. Never heard of them, but they > > will save a lot of unnecessary labor. BTW, the toothpick repair on the key > > mortises did the job, except on the 8 keys where the mortise was so chewed > > up that I had to resort to widen them enought to accept felt bushings. > > Thanks again for your help, and I am grateful that someone knows the ins and > > outs of repairing these old relics. > > Patrick
This PTG archive page provided courtesy of Moy Piano Service, LLC