Can also be the jack hitting the hammer flange if the regulation is way off. David Love www.davidlovepianos.com 415.407.8320 Jon Page <jonpage at comcast.net> wrote: >Since it is in the shank/flange, look for a loose rep lever upstop >(drop) screw, a drop of CA fixes that. > >Other sources of noise at let off: >A hard cushion at the end of the rep lever, under cut with a >narrowed-down Exacto blade. > This releases the hard bond and reduces noise upon upstop screw contact. >The end of the rep spring is binding within the jack. > >-- >Regards, > >Jon Page > -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20121120/646b6d08/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC