I think they glued and screwed, dude! So I guess you are too! New bottom board too! Sad day.. Paul From: "tnrwim at aol.com<mailto:tnrwim at aol.com>" <tnrwim at aol.com<mailto:tnrwim at aol.com>> Reply-To: "pianotech at ptg.org<mailto:pianotech at ptg.org>" <pianotech at ptg.org<mailto:pianotech at ptg.org>> Date: Tuesday, September 25, 2012 3:18 PM To: "pianotech at ptg.org<mailto:pianotech at ptg.org>" <pianotech at ptg.org<mailto:pianotech at ptg.org>> Subject: [pianotech] restringing 1098 I'm in the process of removing the strings of a 1098. Although I can probably work around it, I would like to remove the bottom board. I've got the thing on it's back, and I've removed 6 screws, (3 in each end). But even using a mallet, I can't get the board off. Are these things glued in, and I just have to hit harder, or are there other screws I don't see? Wim -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20120925/ec6457ef/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC