David Good ol' Protec will free up the flange. But only temporarily. I don't think there is any solution that will do the job permanently. Even re pinning is not going to do the job. Replacing the parts is the only permanent solution. Wim -----Original Message----- From: David Love <davidlovepianos at comcast.net> To: pianotech <pianotech at ptg.org> Sent: Wed, Sep 26, 2012 7:22 am Subject: [pianotech] Perma free II I've got a Steinway action that is seizing everywhere: jacks, hammer flanges, etc. Anyone found a good controllable solution short of repinning everything or changing parts? I know, alcohol/water w/ heat is the recommended approach but it produces very inconsistent results in the hammer flanges in my experience. David Love www.davidlovepianos.com (sent from bb) -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20120926/33f49161/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC