I must have forgotten, but, what is a 'socket' chisel? John Ross Windsor, Nova Scotia On 2013-01-19, at 7:01 PM, "Joseph Garrett" <joegarrett at earthlink.net> wrote: > Ron, > Here"s a couple of photos of the set The one on the left is my bridge > chisel w/the rounded corner. The next three are the most recent > aquisitions. The little short one, (which I, incorrectly labeled as a 1/2" > in my past post), 3/4" is the one I got from my Son.<G> Btw, it has been > earth hardened, (notice the "pock marks").<G> Holds a good edge. The one in > the middle is not a socket, but was acquired at a National Convention. It > was used in a Sharpening Class, by Joel & Priscilla and sold to me after > the class was over. It's the youngest one in the bunch and isn't the > quality of the others, in terms of the quality of steel and edge holding > ability. > Best, > Joe > > Joe Garrett, R.P.T. > Captain of the Tool Police > Squares R I > http://gpianoworks.com/ > <Wood Chisels - Socket Type.jpg> -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20130119/ec66ef85/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC