You'll do much better wedging under the legs instead of the dolly. Even just the front legs would do the trick. Susan Mark Schecter wrote: > The stage hands tried turning the wheels yesterday, or so they > thought, but it wasn't solid enough for this pianist. But I don't know > for sure exactly how they did it, because by the time I got there for > touchup just before doors, they had wedged the dolly and he was happy. > I don't fault the player at all, because I have felt the movement and > I understand it could be troubling for some players. In fact, I > appreciate his input, as this solution that I will implement will > benefit everybody, even though many won't know it. > > My thanks to you and others who have contributed to this thread, as I > now have a better idea than I started with, and that is a wonderful > thing. Thanks! > > ~Mark Schecter > > On 1/28/13 7:23 PM, Norman Cantrell wrote: >> Mark >> >> I have had good luck over the years dealing with trucks without brakes >> by simply positioning the piano on the stage and then kicking each of >> the three casters in the same direction as each of the three arms of the >> truck. Position them so the wheel is swiveled toward the center of the >> dolly and because they are all facing a different direction the piano >> stays put. >> >> Joe I do not have a picture of the unit installed and I am no longer on >> contract with the particular university where I installed this unit. It >> is still on the piano as I occasionally attend performances there. >> Because it is painted black and made of fairly thin pipe it fades into >> the background fairly easily and is not a distraction. The reason for >> designing it in the first place was to help the truck roll easily as the >> casters were so canted they did not swivel easily and the piano was very >> difficult to steer and turn. >> >> Norman Cantrell >> >> --- On *Mon, 1/28/13, Mark Schecter /<mark at schecterpiano.com>/* wrote: >> >> >> From: Mark Schecter <mark at schecterpiano.com> >> Subject: Re: [pianotech] Fixing flexy stage dolly >> To: "pianotech at ptg.org" <pianotech at ptg.org> >> Cc: "pianotech at ptg.org" <pianotech at ptg.org> >> Date: Monday, January 28, 2013, 7:45 PM >> >> Thanks for pointing that out, Jon. We actually did that last night, >> but I'm looking to cure the problem so the incognoscenti can just >> position (and reposition) the piano without tools or knowledge. >> Mongo casters with brakes would work too, but they're concerned >> about their new floor being damaged, hence rubber wheels. Do still >> need brakes, though. >> >> ~Mark Schecter >> >> On Jan 28, 2013, at 5:27 PM, Jon Page <jonpage at comcast.net >> </mc/compose?to=jonpage at comcast.net>> wrote: >> >> > I hate to point out the obvious. Place a wooden wedge under the >> truck arm under the leg. Stabilized. >> > >> > I have two of these when installing or removing a truck to place >> under the front legs so the rear arm of the truck does not rise. I >> call them ' Truck Stops'. >> > >> > -- >> > Regards, >> > >> > Jon Page >> > >> > >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20130128/751d5725/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC