[pianotech] Yamaha mufffler rail linkage

[Bruce Browning]

Marshall,
A smart idea would have been to take the turnbuckle with you to the
hardware store, match the size thread by trying a bolt in the hole, then
purchase a number of them for future use. You could then have told us the
size.
Remember that the turnbuckle comprises a left and right-hand thread.

On 4 March 2013 12:22, Marshall Gisondi <pianotune05 at hotmail.com> wrote:

>  Hi Everyone,
> I encountered a Yamaha console today, yeah I had to work a fit someone in.
> Groupon is great but killing me at the same time :-)  Anyway, the two
> little nuts are missing for the turn buckle/linkage.  I thought I'd head to
> the hardward store tomorrow before I head back to tune it. I had to check
> for repairs today.  It also has several bad cord loops and ones that are
> disconnected.  What size nut will I need or do I need a special one from
> Yamaha?  Thanks
> Marshall
>
>
> *Marshall Gisondi*
> *MARSHALL'S PIANO SERVICE*
> *215-510-9400*
> *http://www.phillytuner.com *
>
>


-- 
Bruce Browning
The Piano Tuner
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20130304/b35da545/attachment.htm>