And it will be a metric thread. --- On Sun, 3/3/13, Bruce Browning <justpianos at gmail.com> wrote: From: Bruce Browning <justpianos at gmail.com> Subject: Re: [pianotech] Yamaha mufffler rail linkage To: pianotech at ptg.org Received: Sunday, March 3, 2013, 10:59 PM Marshall, A smart idea would have been to take the turnbuckle with you to the hardware store, match the size thread by trying a bolt in the hole, then purchase a number of them for future use. You could then have told us the size. Remember that the turnbuckle comprises a left and right-hand thread. On 4 March 2013 12:22, Marshall Gisondi <pianotune05 at hotmail.com> wrote: Hi Everyone, I encountered a Yamaha console today, yeah I had to work a fit someone in. Groupon is great but killing me at the same time :-) Anyway, the two little nuts are missing for the turn buckle/linkage. I thought I'd head to the hardward store tomorrow before I head back to tune it. I had to check for repairs today. It also has several bad cord loops and ones that are disconnected. What size nut will I need or do I need a special one from Yamaha? Thanks Marshall Marshall Gisondi MARSHALL'S PIANO SERVICE 215-510-9400 http://www.phillytuner.com -- Bruce Browning The Piano Tuner -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20130304/103c0fd6/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC