[pianotech] Yamaha mufffler rail linkage

[lim hock seng]

Hi Marshall,
Its about 8mm or 10/32(i am not familiar with inches and feet. Hope this
helps as i used to service many Yamahas.
By the way, have you sign up to the google pianotech list?
Cheers,
Lim
On Mar 5, 2013 5:06 AM, "Albert Picknell" <pnrfqsnrk at yahoo.ca> wrote:

> And it will be a metric thread.
>
> --- On *Sun, 3/3/13, Bruce Browning <justpianos at gmail.com>* wrote:
>
>
> From: Bruce Browning <justpianos at gmail.com>
> Subject: Re: [pianotech] Yamaha mufffler rail linkage
> To: pianotech at ptg.org
> Received: Sunday, March 3, 2013, 10:59 PM
>
> Marshall,
> A smart idea would have been to take the turnbuckle with you to the
> hardware store, match the size thread by trying a bolt in the hole, then
> purchase a number of them for future use. You could then have told us the
> size.
> Remember that the turnbuckle comprises a left and right-hand thread.
>
> On 4 March 2013 12:22, Marshall Gisondi <pianotune05 at hotmail.com<http://ca.mc1262.mail.yahoo.com/mc/compose?to=pianotune05@hotmail.com>
> > wrote:
>
>  Hi Everyone,
> I encountered a Yamaha console today, yeah I had to work a fit someone in.
> Groupon is great but killing me at the same time :-)  Anyway, the two
> little nuts are missing for the turn buckle/linkage.  I thought I'd head to
> the hardward store tomorrow before I head back to tune it. I had to check
> for repairs today.  It also has several bad cord loops and ones that are
> disconnected.  What size nut will I need or do I need a special one from
> Yamaha?  Thanks
> Marshall
>
>
> *Marshall Gisondi*
> *MARSHALL'S PIANO SERVICE*
> *215-510-9400*
> *http://www.phillytuner.com *
>
>
>
>
> --
> Bruce Browning
> The Piano Tuner
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20130306/5e5cbf17/attachment.htm>