Damper guide rail bushings

[Horace Greeley]

Lorlin,

You might check with Susan Kline (skline@proaxis.com), for that
article.  She has an amazingly eclectic collection.  (sorry)

Best.

Horace



At 10:37 AM 5/28/1998 GMT, you wrote:
>I need to brush up on some older Steinway damper guide rail rebushing which
>has a wide hole drilled in the rail  requiring either a plug of felt or two
>layers of woven cloth pulled in. This looks quite  like some later asian
>pianos are designed.
>
>Jack Krefting had a 4/85 article on damper guide rails (as listed in Boone's
>cumulative index).  If this article covers this situation, a copy would be
>greatly appreciated.  If it is simpler to just share a few lines of
>experience via  EM I would be greatful to hear it.
>
>Thanks Much!
>
>Lorlin B.
>
> 
>
>
Horace Greeley, CNA, MCP, RPT

Systems Analyst/Engineer
Controller's Office
Stanford University

email: hgreeley@leland.stanford.edu
voice mail: 650.725.9062
fax: 650.725.8014