speaking of damper problems

Jon Page jonpage@attbi.com
Fri Aug 16 17:55 MDT 2002


---------------------- multipart/alternative attachment
At 05:59 PM 8/16/2002 -0400, you wrote:
>In a message dated 8/16/02 9:19:17 PM !!!First Boot!!!, Cramer@BrandonU.CA 
>writes:
>
>
>>have you tried moving the guide rail?
>>
>>First I should ask; can you isolate the ring to one side of a unison?
>
>
>That's the proboem. If it were a right or left string, I could work with 
>it. But its both. The only way to stop it dead is to put my finger on the 
>damper. I guess I could add about 5 or 6 grams of weight tot eh lever, but 
>that would really play havoc with the downm weight of the keys.
>
>I will try moving the guide rail. But if that was the case, how come all 
>of the piano have the same problem?
>
>Wim


Are there assist springs on the underlevers?

Jon Page
---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/caut.php/attachments/be/d3/30/dc/attachment.htm

---------------------- multipart/alternative attachment--




This PTG archive page provided courtesy of Moy Piano Service, LLC