---------------------- multipart/alternative attachment Hi Ed, I often finish the block and then send the case out for refinishing, seems the average torque is 110lbs, Very nice to tune, Regards Roger At 08:29 PM 3/10/2003 -0500, you wrote: >Dear List- > Someone recently told me that to get the most even tuning pin torque > when using Bolduc pinblocks, one must drill the pinblock and restring as > quickly as possible, preferably within one day. > Does anyone have any comments on this? > Thanks. > Ed sutton ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/c5/c6/bd/de/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC