At 05:05 PM 9/17/2003 -0500, Dave wrote: >I have an 1880 vertical, and have restored a number of similar ones, where >even leaning on the tuning pin will not produce such a drastic effect. >These have no plate bushings and a massive capo bar as well and no flex >problems. So, IMHO, I'm not convinced that pin bushings and less friction >will really solve the problem. I wonder if the tuning pins themselves were less springy. Has the metal in the tuning pins been changed? I assume so ... Susan
This PTG archive page provided courtesy of Moy Piano Service, LLC