---------------------- multipart/alternative attachment In a message dated 9/29/03 7:51:39 PM Central Daylight Time, kswafford@earthlink.net writes: > Don't try to make this into a mystery, Wim. It isn't. > > I read Ed's post rather differently than you. I'm not as nice as Ed, so > I'll go ahead and suggest that he was gently telling you that on those > 3 notes you do not have tails with the proper radius and/or backchecks > that are properly angled; if you did, they would work properly. > > This is a not an uncommon problem. You ask, "Why would one key/hammer > work perfectly, and the next one, with all the same characteristics, > not?" Obviously, they do not in reality have the same characteristics. > Keep looking. > > Kent > > I've shaped the tails, rough them up, and eliminated the cutting edge at the bottom. I've adjusted the back checks up, down, in and out. Now what? Wim ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/d0/e4/2c/c4/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC