That is the question...will it last! Let us know. David Ilvedson ----- Original message ----------------------------------------> From: Mark Cramer <Cramer@BrandonU.ca> To: CAUT <caut@ptg.org> Received: Mon, 30 Aug 2004 10:53:19 -0500 Subject: [CAUT] wippen heels & steam >a month or so back I mentioned having little success steaming wippen heel >cloth back to shape, but it seems I am wrong. >I was using "loose steam" from a portable steamer, which merely made the >cloth damp. >Since then, I've used an iron and damp cloth as you would if steaming out >crushed wood veneer, and the results are well worth it. >(follow-up with a dry-warm pressing with the iron) >I also recommend bolstering wippen heels if possible/necessary with bushing >cloth, if they don't have this already. >Anything that restores the charactristics of a new well-made part, and >lasts, is worth a try! >Mark Cramer, >Brandon University >_______________________________________________ >caut list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC