---------------------- multipart/alternative attachment At 09:08 PM 7/27/2004, you wrote: >Lance, do the knuckle cores line up with the rear of the jacks in a >straight line? Also can you get the drop and let off to happen simultaneously? > >llafargue <llafargue@charter.net> wrote: Hi Lance, There is no single adjustment that fixes this malady. The jack position,repetition height, blow distance, and repetition spring tension, are all interactive with each other. Now add let off, and drop to the mix, just to make life a little more difficult. Start by checking the back checking/rep spring tension. Next, move on to jack position, and repetition lever height. (winking the jack). After this the hammer line needs touching up. Let off and drop, should be done now, before moving through all the regulation steps again. Regards Roger ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/a3/94/b6/9a/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC