This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment List, I have walked into a Steinway O rebuild (1901) midway to help another tech and to make a long story shorter.. I have no string height measurements (plate is pulled) and I'm thinking I need that to measure/weigh for new parts. Key leads have been removed/added over the years, so I am particularly concerned about ordering the best parts (knuckle location, hammer weight, etc). I know plate locations varied, etc., but I'm ignorant as to how much variation there was over the years with string height, etc. Anyone have a clue where I should head?? I measured a 20 year old L, but don't know if that is in the ballpark (seems low). Thanks. Lance Lafargue, RPT LAFARGUE PIANOS New Orleans Chapter, PTG 985.72P.IANO llafargue@charter.net ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/1d/b3/25/ea/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC